If you recently bought a home that already had a wired home security system, you may be able to save a significant amount of money and take advantage of your security system by having a professional customize it. We can tell you how you can re-activate your home security system and take advantage of your existing equipment while adding additional wireless equipment to cover dead spots in your home, if necessary.
How secure is a wired home security system?
Let’s examine the security of a hard-wired alarm system.
From wireless alarm system promoters you may typically hear, “With a wired system, you also have to worry about the wires being cut and power outages, which are not issues on a wireless system.” This is not necessarily true, for the following reasons:
- Hard-wired alarm systems (which use alarm wiring to connect sensors to the control panel) are not disabled by cutting wires.
- Extended power outages are an issue with wireless alarm systems.
To state that a “hard-wired alarm system is disabled by cutting wires” is the same thing as saying that a “wireless alarm system is defeated by pulling a wireless sensor off of the wall”. This is not how these respective alarm systems work.
Wired vs wireless home security
So which wires should you be worried about being cut? Communication wires are a concern, not the hard-wired alarm system’s device wiring: The only wires to be concerned about are any wires which either alarm system (hard-wired or wireless) might be using to communicate to a monitoring station, such as a telephone line. If you have a wireless means of communication (such as a long-range radio or cellular communicator) between your home and your monitoring station, then you have no wires to worry about being cut—with either a wireless or a hard-wired alarm system.
Don’t forget that a completely wireless alarm system can be set-up to use a telephone to communicate to the monitoring station. This scenario would mean that you actually do have wires to be concerned about being cut with a wireless alarm system. The only way to avoid this is by going with an alarm system that uses 100% cellular monitoring.
Extended power outages are a concern for all alarm systems. Alarm control panels for both wireless and hard-wired alarm systems have rechargeable batteries so that the control panel can function in the event of a power failure which interrupts electricity to the control panel. The fact that a wireless motion detector has a battery inside of it is irrelevant if the wireless alarm system’s control panel or its communicator have no electrical power to transmit an alarm signal during a power failure!
Every alarm system has a rechargeable back-up battery that “takes over” in the event of a power failure. If the power outage lasts for several hours, the rechargeable battery will eventually be “used up” by providing electricity to the alarm system. When this battery runs out of power, the alarm system’s control panel (hard-wired or wireless) will cease to function – – even if there is remaining battery life in the individual wireless sensors (wireless door contact, wireless motion detector, etc).
Advantages of wired vs wireless systems
If you move into a home that has a wired system already installed, there are some advantages of using that system instead of installing an entirely new one.
- One of the largest upfront costs, installation, is already done for you
- Your home probably has an “adequate alarm system” since the professional installer was physically in your home and was able to decide what devices would satisfy the home
- Hard-wired security equipment is usually less expensive than wireless equipment
- You don’t have to change the batteries in hard-wired equipment because there are none, so this adds an additional savings to you
Disadvantages of wired vs wireless systems
We couldn’t really think of many disadvantages to having a wired security system. If the system is already installed, many of the typical disadvantages are not applicable to you. For example, paying for installation would be a disadvantage, but your system is already installed so it doesn’t apply to you.
The only disadvantages are that the system may be outdated and need some revamping and updated, replacement equipment. Additionally, you might encounter a possible limitation of equipment if your wired system does not support the newer wireless equipment and technologies you might want.
Hybrid alarm systems: wired and wireless
A hybrid alarm system allows you to take advantage of your home’s pre-wired security system and add on any wireless equipment needed. Our guess is that if you have a wired alarm system, you only have an empty metal cabinet with the Honeywell (or other) logo on it, being used as a termination point for all of the alarm wiring that was passed throughout your home.
Alarm installing companies in your area will advise you on the choice of other alarm panels that you can choose from (including Honeywell). Because every one of these systems is going to be highly individual to your situation – existing equipment, desired equipment, and desired level and type of monitoring – we cannot cover every possible combination here, but encourage you to contact a local alarm company or the original manufacturer of your wired system to see what your options are.
The good news is, in most situations, you will be able to have almost ANY alarm feature or service currently on the market that you desire, such as interactive services, text messages sent to your cell phones and a wireless communication means of sending alarm signals to a monitoring station, with a hybrid (combination hard-wired and wireless) alarm system installed into your pre-wired home. You might also have the option of adding home automation features that may not have been available when your wired alarm system was installed. But make certain to check with the company your wired equipment comes from: in some cases, the possibility for a hybrid system simply does not exist.
FAQ about hybrid systems
This is a popular topic that we often get questions about in our comment section. Below are some of the common questions we have received about hybrid systems. We also suggest scanning the comment section further for any new comments that may not be included in this section, and as always, ask us any questions you still have about this subject.
- I have a Honeywell wired system and want a self-monitoring option using the existing equipment and add a Honeywell wifi thermostat.
- You need a Honeywell control panel installed that has a wifi connection (like the Honeywell Tuxedo Touch) so you can control Z-wave thermostats (like the Honeywell ZWSTAT). Honeywell’s Total Connect packages allow you to self monitor the system.
- I purchased a house with a hard-wired system setup but don’t have the code for it. Can we still use it and have additional equipment added on to it?
- Find out which company the system belongs to and contact them directly. They will be able to convert the system to your own and give you a code as well as an estimation of add ons that are available.
- I purchased a house with a hard-wired system setup and want to add some home automation to it in a DIY style. How can I achieve this?
- With all the options for home automation, including Z-wave technology, there are a lot of pieces of equipment you would likely be able to choose from to integrate home automation into your wired system. Because each company’s equipment is different, however, you should call them to confirm what your options are. Or, you could sign up for home automation and security with Link Interactive – one of our favorite home security systems that prides themselves on being one of the only companies to offer “takeovers” – the ability to utilize old equipment and make them compatible with their systems.
Using an older wired system with new wireless components
It’s possible for you to use a wired security system with new wireless components—Honeywell is known for doing this. It’s important that you first find out what company your wired system is from. Once you have that figured out, contact them and discuss adding wireless components to your system. Not many wired alarm systems are being installed nowadays, so fewer and fewer companies deal with them. Also, few companies do hybrid systems at all. In fact, researching for this article was challenging because there is little information out there about them, so we were unable to find general pricing information or other more specific information about what wired equipment works with what wireless equipment. If you contact the manufacturer of your pre-existing wired equipment and find that you are not going to be able to create the system you want, be sure to check out newer systems and what their capabilities are.
We suggest taking a look at our best home security systems reviews and see which companies we consider to be the best.
What company is your hard-wired system through?